Dometic SeaStar HH5271 Front-Mount Hydraulic Helm Pump - 1.7 cu in

Nothing gets you closer to power steering!

The Dometic SeaStar Helm Pump is an axial piston pump specifically designed for manual steering. Every load bearing point within the helm pump runs on either a roller or ball bearing race for super low friction, smooth, positive steering. It has a built-in lock valve to prevent the steering load from feeding back to the driver. The lock valve will not allow the rudder or drive unit to move until you apply load by turning the steering wheel. The lock valve section of the helm also includes a relief valve. This relief valve provides over pressure protection for mechanical components, hydraulic hoses and fittings.

Features

Satin black baked enamel finish over anodising

Maximum steering wheel diameter is 660mm

Can be retro-fitted into old Dometic SeaStar 115mm hole cut out (use 291908 mounting kit)

Small 76mm hole cut out in dash

Available in five capacities

291503 Commercial helm pump designed with heavy duty shaft seal and wiper

Convenient front of dash fill

Complete with 2 elbow fittings, 2 nuts and olives

Important: Specifications vary by product code. Confirm the required size or configuration before ordering.

Product code: 291502

Please compare the product code and specifications with the required application before ordering.