Rule Marine Bilge Pump, Submersible, 360gph, 12V, Non Auto

12 volt 360 GPH 2.1amp . RULE Model 24DA

Next generation compact Submersible 360 GPH electric pump for use as a bilge or bait pump on smaller craft. Totally Submersible pump with water cooled, ignition and TCO Protected motor, Stainless Steel shaft and snap-on strainer base. This pump is extremely efficient, draws low current and offers high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump - requires a Rule float switch to operate automatically. Please note - using the included check valve will reduce the output flow of the pump. Available in 12 volts only.

3 year limited warranty.

• Fully Submersible pump - 360 US gallons per hour - 23 litres per minute @ 12V
• Higher flow - optimised impeller to Provide greater flow at the sameamp erage as Previous model
• High efficiency, lowamp draw ignition Protected motor includes true Electromagnetic suppression (EMC)
• 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature to stop water wicking down inside the wiring
• Built-In thermal cut-out (TCO) in the motor Provides additional Protection for pump & ; vessel
• Backflow Pairevention - now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
• Please note - using the check valve will reduce the rated output flow.
• Threaded discharge port - gives easier installation and maintenance.
• Discharge hose port is included with each pump
• Hidden air vents in the pump Pairevent air locking in challenging plumbing installations and helps with the check valve operation
• Compact - 99mm Height x 74mm Width x 64mm depth - not including discharge
• 2.1amp draw @ 12V DC
• Threaded hose outlet suits 20mm (3/4") hose. 1 x straight port Provided.