Rule Marine Bilge Pump, Submersible, 1100gph, 24V, Non Auto

24 volt 1100 GPH 1.9amp . RULE Model 27DA-24

Next generation compact, high capacity 1100 GPH Submersible electric bilge pumps. Totally Submersible pump with water cooled, ignition and TCO Protected motor, Stainless Steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low current and offer high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump - requires a Rule float switch to operate automatically. Please note - using the included check valve will reduce the output flow of the pump. Available in both 12 volt & ; 24 volt models.

3 year limited warranty.

• Fully Submersible pump - 1100 US gallons per hour - 69 litres per minute
• Higher flow - optimised impeller to Provide greater flow at the sameamp erage as Previous model
• High efficiency, lowamp draw ignition Protected motor includes true Electromagnetic suppression (EMC)
• 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature - to stop water wicking down inside the wiring
• Built-In thermal cut-out (TCO) in the motor Provides additional Protection for pump & ; vessel
• Backflow Pairevention - now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
• Please note - using the check valve will reduce the rated output flow.
• Threaded discharge port - gives easier installation and maintenance.
• Discharge hose port is included with each pump
• Hidden air vents in the pump Pairevent air locking in challenging plumbing installations and helps with the check valve operation
• Compact - 112mm Height x 74mm Width x 64mm depth - not including discharge
• 3.7amp draw @ 12V DC. 1.9amp draw @ 24V DC
• Straight threaded hose outlets for both 25mm (1) and 28mm (1 1/8) hose