Rule Automatic Marine Bilge Pump, Submersible, 800gph, 12V

12 volt 800 GPH 3.4amp Automatic. RULE Model 20SA

Next generation compact Submersible 800 GPH Automatic Sensing electric bilge pump - no fl oat switch required. Totally Submersible pump with water cooled, ignition and TCO Protected motor, Stainless Steel shaft and snap-on strainer base. These pumps are extremely effi cient, draw low current and offers high capacity output in a very compact housing, to fi t into the smallest available space. Please note - using the included check valve will reduce the output fl ow of the pump. Consumes 0.20amp s per day. 12 or 24 volt DC only - Cannot be run through 240v transformers. Available in both 12 & ; 24V models.

3 year limited warranty.

• Fully Submersible pump - 800 US gallons per hour - 50 litres per minute
• Higher fl ow - optimised impeller to Provide greater fl ow at the sameamp erage as Previous model
• High effi ciency, lowamp draw ignition Protected motor includes true Electromagnetic suppression (EMC)
• 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature - to stop water wicking down inside the wiring
• Built-In thermal cut-out (TCO) in the motor Provides additional Protection for pump & ; vessel
• Backfl ow Pairevention - now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
• Please note - using the check valve will reduce the rated output fl ow.
• Threaded discharge port - gives easier installation and maintenance. Discharge hose port is included with each pump
• Hidden air vents in the pump Pairevent air locking in challenging plumbing installations and helps with the check valve operation
• Compact - 120mm Height x 74mm Width x 64mm depth - not incl. discharge
• 3.4amp draw @ 12V DC. Consumes only 0.20amp s per day.
• Threaded hose outlet suits 20mm (3/4") hose